home | mitsubishi | toshiba | carrier | pool heat pumps | contact us | online enquiry | links


 

 
Mitsubishi Electric Banner

Inverter Console Mounted

 

Thermostatically controlled upper and lower air outlets Whisper Quiet and Energy Efficient

 

The new range is specifically designed to discreetly sit at floor level or be recessed* into the wall and could replace traditional floor mounted heating appliances such as night-store heaters. The slim-line range features independently controllable upper and lower air outlets ensuring optimum air distribution to guarantee warm feet! A comprehensive deodorising and air purifying filter system will ensure healthier and cleaner air. All this is packed in a compact floor design with the whisper quiet performance that you have come to expect from Mitsubishi Electric. 

 

 

 

 

 

MFZ-KA25VA to MFZ-KA50VA
Dimensions (H x W x D): 325 x 1,100 x 258mm

 


 

MFZ-KA25VA (MFZ-KA25VA + SUZ-KA25VA)

Cooling Capacity: 2.5 (0.9~3.4) kW

Heating Capacity: 3.4 (0.9~5.1) kW

 

 

MFZ-KA35VA (MFZ-KA35VA + SUZ-KA35VA)

Cooling Capacity: 3.5 (0.9~3.9) kW

Heating Capacity: 4.0 (0.9~6.2) kW

 

 

MFZ-KA50VA (MFZ-KA50VA + SUZ-KA50VA)

Cooling Capacity: 4.8 (0.9~5.4) kW

Heating Capacity: 6.0 (0.9~7.9) kW

 

 

 

Maximum Heat Output, Optimum Air Distribution

 

Perfect room temperatures at any time are realised through dual top and bottom air flow with thermostatically controlled vanes to eliminate cool drafts whilst heating. Mitsubishi Electric Inverter Control (unlike other brands) will allow maximum rated heat output indefinitely without the requirement to return to the nominal rated output. Optimum comfort conditions are guaranteed in the shortest period of time. This is vital when outdoor temperatures drop below freezing point or when the unit is first turned on.

i-save Mode

 

With this function, you can save the settings such as temperature, fan speed, and air flow direction for both cooling and heating operation. This function can be used to quickly return to your preferred settings. The ‘i-save’ operation can be used as an energy saving function. ie: If the stored ‘i-save’ settings are 2-3°C Cooler than the normal temperature setting when the operation is activated the room will be set to the cooler temperature and when the room is reoccupied the button can be pressed to return to the original settings.

Guaranteed heating performance down to minus 15 degrees*.

 

Not all heat pumps perform when they are needed most. Our range is guaranteed to effectively provide heating on those cold nights or mornings when you really need it.                                                                              * MFZ-KA25/35VA, all others -10°C

Specifications

 

 
    Power Supply: All 230V, Single Phase, 50 Hz.
     *Sound Level: Low / Medium / High. **SH = Super High.
     Colour: Heat pump units shown may not be colour accurate, please ensure you view an actual
     unit for colour matching.
     † Maximum length is inclusive of height differential. i.e. (30/15) means the pipe can be 15m
      high and 15m across for a total length of 30m.

 

 

COP (Coefficient of Performance) or Efficiency is the ratio of energy input to energy output. ie. a system with a COP / EER of 3.5 would produce 3.5kW of heat on the heating cycle for each 1.0kW of electrical energy input and remove 3.5kW of heat on the cooling cycle.

 

Download a copy of the full product brochure

 


home | mitsubishi | toshiba | carrier | pool heat pumps | contact us | enquiries | links